BUILD YOUR BOARD YOUR WAY!

LEANER PRO

Ibanez Tube Screamer (TS9) on a set of LEANER PRO pedal risers

Flat Riser Height Comparison

STILT VS XL STILT VS SKY SCRAPER. 1/2" to 1-1/2"

RAIL-TIE System for PedalTrain

A PedalTrain pedalboard set up with RAIL-TIE Plates to alleviate the gaps between rails and allowing more freedom to lay the board out the way you want to get a tighter and cleaner set-up.

PT MINI Rail-Tie Set Installed

Pedaltrain PT-Mini boards were made with a unique design that gave a special gap at the top for wire routing. This Rail-Tie Set is made to work with that gap for wire routing but get rid of the excess dead space.

[8]LEANER

A quad cortex resting on a set of [8]Leaner

PedalTrain Terra 42 RAIL-TIE Set

A PedalTrain Terra 42 set up with a set of coordinating RAIL-TIE system Terra 42 plates.

BLOCKEE

BLOCKEE Pedal Risers being used to give a height boost under a Strymon BigSky and also allow some room for Wire Routing underneath the BigSky

Slide & Pick Tray

SCAFFOLD Pedal Risers

Scaffold Risers being used under a Strymon Cloud Burst pedal to help with footswitch height as well as Wire Routing.

Micro Stilt Pedal Riser

The Micro Stilt being used under a nano sized pedal to make the footswitch accessible without incidentally knocking the controld on the pedal next to it.

3/4" Pro Series Flat Riser

The Pro Series Flat Pedal Risers allow you to take advantage of a height boost with wire routing channels carved through the bottom of every Pro Series Pedal Riser!

Pro Series Flat Riser Family Photo

The Pro Series Flat Pedal Risers allow you to take advantage of a height boost with wire routing channels carved through the bottom of every Pro Series Pedal Riser!

ATG - AMPS TO GO BOARD

The ATG (Amps To-Go) Board is designed to have just enough room for 2x ToneX ONE pedals and a D.I. Box like the Pinstripe DISO or Walrus Canvas D.I.

ATG - Amps To-Go Board

The ATG (Amps To-Go) Board is designed to have just enough room for 2x ToneX ONE pedals and a D.I. Box like the Pinstripe DISO or Walrus Canvas D.I.

STILT Pedal Riser

The STILT is the first riser design we released and still goes strong as a vastly universal swiss army knife of pedal risers. It is stackable and provides a 1/2" Lift to pedals. Here, You can see the STILT making wire routing possible under a Walrus Canvas D.I.

RAIL-TIE System Plates

A PedalTrain pedalboard set up with RAIL-TIE Plates to alleviate the gaps between rails and allowing more freedom to lay the board out the way you want to get a tighter and cleaner set-up.

6 LEANER WITH DVP MINI

The (6)Leaner helps with 6" long pedals like the DVP MINI on angled pedalboards to bring the pedal more level making it easier to use the full sweep of the pedal naturally.

JIG

The JIG is a Capo & Slide holder combo for use on a pedalboard during a live performance making these tools easier to reach while playing.

BLOCKEE ARMY

The BLOCKEE ARMY gives you a whopping 20 BLOCKEE Pedal Risers as well as a Blockee Mini Figure wearing a Viking Helm

AXIS

The AXIS gives a slight boost to the footswitch end of a pedal for angled pedalboards.

RAIL-TIE System

A PedalTrain pedalboard set up with RAIL-TIE Plates to alleviate the gaps between rails and allowing more freedom to lay the board out the way you want to get a tighter and cleaner set-up.

RAIL-TIE System

Rail-Tie System freshly applied to a PedalTrain Board

RAIL-TIE System

A PedalTrain pedalboard set up with RAIL-TIE Plates to alleviate the gaps between rails and allowing more freedom to lay the board out the way you want to get a tighter and cleaner set-up.

XL MICRO STILT

The XL Micro Stilt gives a 1" Boost to Nano sized Pedals.

Half Rest

The Half Rest allows you to store your capo flat on your pedalboard for quick access when the board is in use.